Acer Aspire 3 A315-41-R9J1 - RAM Upgrade Guide
The Acer A315-41-R9J1 laptop has one memory slot available for RAM upgrades. It can support a maximum memory capacity of 16GB. The type of RAM compatible with this laptop is DDR4 SDRAM, and it uses a SODIMM form factor, which is a smaller type of memory module commonly used in laptops. For optimal performance, it is suggested to use RAM with a clock speed of 2666MHz, which corresponds to the PC4-21300 standard.
Acer Aspire 3 A315-41-R9J1 Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Acer Aspire 3 A315-41-R9J1 |
| Total memory slots | 1 |
| Maximum RAM | 16GB |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2666MHz (PC4-21300) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Acer Aspire 3 A315-41-R9J1 RAM
How many RAM slots does this laptop have?
Just one slot total. The laptop comes with memory already installed in that single slot, so you'll need to replace it rather than add to it.
What's the maximum RAM I can install?
You can go up to 16GB. That's the ceiling for this model - won't recognize anything larger even if you try to install it.
What type of RAM do I need to buy?
You need DDR4 SODIMM memory. Make sure it's SODIMM (the smaller laptop memory) not regular desktop RAM. DDR3 or DDR5 won't work - has to be DDR4.
What speed RAM should I get?
Look for 2666MHz (also labeled as PC4-21300). The laptop might work with faster RAM but it'll just run at 2666MHz anyway, so no point paying extra for faster speeds.
Can I mix different RAM sizes or speeds?
Not applicable here since there's only one slot. Whatever single stick you install is all you get - no mixing possible.
Will I lose my existing RAM when upgrading?
Yes, you have to remove the current memory stick to install the new one. Since there's only one slot, it's a straight swap. Make sure to keep the old stick as a backup.