Acer Aspire 5 A515-51-59VV - RAM Upgrade Guide

laptop img

The Acer A515-51-59VV laptop has two memory slots for RAM, but only one of these can be upgraded by the user. The maximum amount of memory the laptop can support is 20GB, with up to 16GB possible in the slot that can be accessed for upgrades. The type of memory used is DDR4 SDRAM, and it comes in a small outline dual inline memory module (SODIMM) format. For optimal performance, the recommended clock speed for the RAM is 2666MHz, which corresponds to the PC4-21300 standard.

Acer Aspire 5 A515-51-59VV Memory Specifications & Maximum RAM Capacity

SpecificationValue
Laptop ModelAcer Aspire 5 A515-51-59VV
Total memory slots2 (1 not upgradeable)
Maximum RAM20GB (up to 16GB in user accessible slot)
Memory typeDDR4 SDRAM
Form factorSODIMM (Small Outline Dual Inline Memory Module)
Recommended RAM clock speed2666MHz (PC4-21300)
VoltageLow - 1.2V
Number of pins260-pin

FAQ about Acer Aspire 5 A515-51-59VV RAM

What's the deal with RAM slots in the Acer A515-51-59VV?

This laptop has 2 RAM slots total, but here's the catch - only 1 slot is accessible for upgrades. The other slot has memory soldered directly to the motherboard, so you can't touch it.

How much RAM can I actually add to this laptop?

You can add up to 16GB in the single accessible slot. Since there's already some RAM soldered on board, the maximum total is 20GB.

What type of RAM do I need for this Aspire 5?

You'll need DDR4 SODIMM memory - that's the smaller laptop-sized RAM, not the full-size desktop sticks. Make sure it's DDR4, not the older DDR3.

What speed RAM should I get?

Go with 2666MHz (also labeled as PC4-21300). The laptop might work with faster RAM, but it'll just run at 2666MHz anyway, so no point spending extra on faster speeds.

Can I mix different RAM sizes or speeds?

Since one slot has fixed memory you can't change, you're already mixing. Just add whatever size you need in the accessible slot - 4GB, 8GB, or 16GB. The system will handle it.

Is upgrading the RAM on this model difficult?

Pretty straightforward - remove the bottom panel, locate the empty RAM slot, insert the new module at an angle, then press down until it clicks. Just remember to power off completely and remove the battery first.