Acer Aspire 5 A515-54-50CY - RAM Upgrade Guide
The Acer A515-54-50CY laptop has one memory slot available for RAM upgrades. It supports a maximum memory capacity of 16GB. The type of memory compatible with this laptop is DDR4 SDRAM, and it uses a SODIMM form factor, which is a compact design commonly used in laptops. For optimal performance, it is suggested to use RAM with a clock speed of 2666MHz, also referred to as PC4-21300.
Acer Aspire 5 A515-54-50CY Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Acer Aspire 5 A515-54-50CY |
| Total memory slots | 1 |
| Maximum RAM | 16GB |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2666MHz (PC4-21300) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Acer Aspire 5 A515-54-50CY RAM
How much RAM can I put in my A515-54-50CY?
Maximum is 16GB. The laptop only has one memory slot, so you'll need to replace the existing RAM with a single 16GB stick if you want to max it out.
What type of RAM does the A515-54-50CY use?
It uses DDR4 SODIMM - that's the smaller laptop-sized memory stick, not the full-size desktop RAM. Make sure you get SODIMM, not regular DIMM.
What speed RAM should I get for the A515-54-50CY?
2666MHz (also labeled as PC4-21300) is the recommended speed. You can install faster RAM, but it'll just run at 2666MHz anyway, so no point spending extra.
Can I add more RAM without removing the existing stick?
No, this model only has one RAM slot. Whatever's in there now has to come out if you want to upgrade. No dual-channel option here unfortunately.
Is 8GB enough or should I go straight to 16GB?
Depends what you're doing. 8GB is fine for basic stuff - browsing, documents, light multitasking. If you're into photo editing, keeping lots of browser tabs open, or running multiple programs, go for 16GB.
Will any DDR4 SODIMM work in my A515-54-50CY?
Pretty much, as long as it's DDR4 SODIMM and not faster than what your system can handle. Stick with standard voltage (1.2V) modules - the low voltage stuff can be finicky.