Acer Nitro AN515-51-78C6 - RAM Upgrade Guide

laptop img

The Acer AN515-51-78C6 laptop has two memory slots available for RAM upgrades, allowing for a maximum memory capacity of 32GB. It supports DDR4 SDRAM, which is a common type of memory used in modern laptops. The RAM should be in the SODIMM format, which is a smaller version of memory modules designed for compact devices like laptops. For best performance, it is suggested to use RAM with a clock speed of 2400MHz, also referred to as PC4-19200.

Acer Nitro AN515-51-78C6 Memory Specifications & Maximum RAM Capacity

SpecificationValue
Laptop ModelAcer Nitro AN515-51-78C6
Total memory slots2
Maximum RAM32GB
Memory typeDDR4 SDRAM
Form factorSODIMM (Small Outline Dual Inline Memory Module)
Recommended RAM clock speed2400MHz (PC4-19200)
VoltageLow - 1.2V
Number of pins260-pin

FAQ about Acer Nitro AN515-51-78C6 RAM

What's the max RAM I can put in this Nitro laptop?

You can go up to 32GB total - that's 16GB per slot since you've got 2 slots to work with.

What type of RAM sticks do I need to buy?

You need DDR4 SODIMM - those are the smaller laptop memory sticks, not the full-size desktop ones. Make sure it's SODIMM or it won't fit.

Does the RAM speed matter for this model?

The recommended speed is 2400MHz (also labeled as PC4-19200). You can technically use faster RAM but it'll just run at 2400MHz anyway, so no point paying extra for faster speeds.

Can I mix different RAM sizes?

Yeah, you can do like 8GB + 16GB if you want, but for best performance it's better to match them - so either 8GB + 8GB or 16GB + 16GB. Matching sizes lets them run in dual channel mode which is faster.

Do I need to remove the old RAM first?

Depends what's already in there. If both slots are full, you'll need to take out at least one stick. If you've got one empty slot, you can just add to it.

Is upgrading the RAM difficult on this laptop?

Not really - you just need to remove the bottom panel, ground yourself to avoid static, and the RAM slots should be pretty accessible. The sticks go in at an angle then click down flat.