Acer Nitro AN715-51-752B - RAM Upgrade Guide
The Acer AN715-51-752B laptop supports RAM upgrades with a total of two memory slots available. It can handle a maximum memory capacity of 64GB. The type of memory used is DDR4 SDRAM, and it comes in the SODIMM form factor, which is a compact design commonly used in laptops. For optimal performance, it is suggested to use RAM with a clock speed of 2666MHz, also referred to as PC4-21300.
Acer Nitro AN715-51-752B Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Acer Nitro AN715-51-752B |
| Total memory slots | 2 |
| Maximum RAM | 64GB |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2666MHz (PC4-21300) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Acer Nitro AN715-51-752B RAM
How much RAM can I put in the AN715-51-752B laptop?
You can install up to 64GB total. The laptop has 2 memory slots, so that's 32GB per slot maximum.
What type of RAM do I need for this Nitro laptop?
You need DDR4 SODIMM modules. Make sure to get laptop memory (SODIMM), not desktop RAM - they're physically different sizes and won't fit.
What speed RAM should I buy?
Get 2666MHz DDR4 (also labeled as PC4-21300). The system might accept faster RAM but it'll just run at 2666MHz anyway, so no point spending extra on faster speeds.
Can I mix different RAM sizes?
Yes, you can mix sizes like 8GB + 16GB. But for best performance, matching pairs (like 16GB + 16GB) enable dual-channel mode which gives better speed. Mixing still works though.
Do I need to remove the existing RAM?
Depends what's already installed. If both slots are full, you'll need to remove at least one stick. If there's an empty slot, just add the new RAM there.
Is the RAM upgrade difficult?
Pretty straightforward - usually just remove the bottom panel, find the RAM slots, and click the modules in place. Takes about 10 minutes if you're comfortable with basic computer stuff.