Acer Nitro VN7-572G - RAM Upgrade Guide
The Acer VN7-572G laptop has two slots available for memory upgrades, allowing for a maximum capacity of 32GB. It uses DDR4 SDRAM, which comes in a SODIMM format, a compact type of memory module designed for laptops. For best performance, the memory should operate at a clock speed of 2133MHz, often referred to as PC4-17000.
Acer Nitro VN7-572G Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Acer Nitro VN7-572G |
| Total memory slots | 2 |
| Maximum RAM | 32GB |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2133MHz (PC4-17000) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Acer Nitro VN7-572G RAM
How many RAM slots does the Acer VN7-572G have?
It has 2 memory slots total. Both are accessible after removing the bottom panel.
What's the maximum RAM I can install in this laptop?
You can go up to 32GB total - that's 16GB per slot. Pretty decent ceiling for most tasks.
What type of RAM do I need for the VN7-572G?
You need DDR4 SODIMM modules. Make sure it's SODIMM (the smaller laptop memory) not regular desktop RAM which won't fit.
What speed RAM should I get?
2133MHz (also labeled as PC4-17000) is the recommended speed. Higher speeds will work but will downclock to 2133MHz anyway, so no point spending extra.
Can I mix different RAM sizes?
Yes, you can mix sizes like 8GB + 16GB, but for best performance try to match capacity and speed. Mixing works but dual channel performance is better with matched pairs.
Do I need to remove the existing RAM?
Depends what's already installed. If you have one stick and one empty slot, just add to the empty one. If both slots are filled with smaller modules, you'll need to replace them.