Acer Nitro VN7-591G-70RT - RAM Upgrade Guide
The Acer VN7-591G-70RT laptop has two memory slots for RAM upgrades. It supports a maximum memory capacity of 16GB. The type of memory used is DDR3 SDRAM, and it comes in the SODIMM format, which is a compact design suitable for laptops. For optimal performance, the recommended RAM clock speed is 1600MHz, also referred to as PC3-12800.
Acer Nitro VN7-591G-70RT Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Acer Nitro VN7-591G-70RT |
| Total memory slots | 2 |
| Maximum RAM | 16GB |
| Memory type | DDR3 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 1600MHz (PC3-12800) |
| Voltage | Low - 1.35V (DDR3L / PC3L) |
| Number of pins | 204-pin |
FAQ about Acer Nitro VN7-591G-70RT RAM
What's the maximum RAM I can put in the Acer VN7-591G-70RT?
You can upgrade to a maximum of 16GB total. The laptop has 2 memory slots, so that's 8GB per slot max.
What type of RAM does this Nitro laptop need?
It uses DDR3 SODIMM modules - that's the smaller laptop-sized RAM sticks, not the full-size desktop ones. Make sure you get DDR3, not DDR4 or DDR5.
What speed RAM should I buy for the VN7-591G-70RT?
Go with 1600MHz (also labeled as PC3-12800). The system might accept faster RAM but it'll just run at 1600MHz anyway, so no point paying extra for faster speeds.
Can I mix different RAM sizes or do they need to match?
You can mix sizes like 4GB + 8GB to get 12GB total, but for best performance it's better to use matching pairs - either 2x4GB or 2x8GB. Matching pairs enable dual-channel mode which gives better performance.
Do I need to remove the existing RAM when upgrading?
Depends what's already installed. If you've got say 2x4GB and want 16GB total, you'll need to remove both sticks and replace with 2x8GB since each slot maxes out at 8GB.