Acer Nitro VN7-791G-792A - RAM Upgrade Guide
The Acer VN7-791G-792A laptop has two memory slots for RAM upgrades, allowing a maximum capacity of 16GB. It uses DDR3 SDRAM as the memory type, which comes in the SODIMM format, a compact design commonly used in laptops. For optimal performance, the recommended RAM speed is 1600MHz, often labeled as PC3-12800.
Acer Nitro VN7-791G-792A Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Acer Nitro VN7-791G-792A |
| Total memory slots | 2 |
| Maximum RAM | 16GB |
| Memory type | DDR3 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 1600MHz (PC3-12800) |
| Voltage | Low - 1.35V (DDR3L / PC3L) |
| Number of pins | 204-pin |
FAQ about Acer Nitro VN7-791G-792A RAM
How much RAM can I put in my Acer VN7-791G-792A laptop?
You can install up to 16GB total. The laptop has 2 memory slots, so you could do 2x8GB sticks for the maximum capacity.
What type of RAM does the Acer VN7-791G-792A use?
It uses DDR3 SDRAM in the SODIMM form factor - that's the smaller laptop-sized memory sticks, not the full-size desktop ones.
What speed RAM should I get for the VN7-791G-792A?
Go with 1600MHz (also labeled as PC3-12800). That's the recommended speed for this model.
Can I mix different RAM sizes in my VN7-791G-792A?
Technically yes, like 4GB + 8GB, but it's better to use matching pairs (like 2x4GB or 2x8GB) for optimal dual-channel performance.
Do I need to remove the existing RAM when upgrading?
Depends on your current setup. If you already have 2 sticks installed, you'll need to replace at least one. If you only have 1 stick, you can just add another in the empty slot.