Acer Nitro VN7-792G-7524 - RAM Upgrade Guide
The Acer VN7-792G-7524 laptop has two memory slots available for RAM upgrades. It supports a maximum memory capacity of 32GB. The type of memory used is DDR4 SDRAM, and it comes in the SODIMM format, which is a compact design typically used in laptops. For optimal performance, it is suggested to use RAM with a clock speed of 2400MHz, also referred to as PC4-19200.
Acer Nitro VN7-792G-7524 Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Acer Nitro VN7-792G-7524 |
| Total memory slots | 2 |
| Maximum RAM | 32GB |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2400MHz (PC4-19200) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Acer Nitro VN7-792G-7524 RAM
How much RAM can I put in my VN7-792G laptop?
Maximum is 32GB total. You've got 2 slots, so that's 16GB per slot if you want to max it out.
What type of RAM do I need for this laptop?
You need DDR4 SODIMM modules - the smaller laptop-sized ones, not the full-size desktop sticks. Make sure it's DDR4, not DDR3 or DDR5.
What speed RAM should I get?
2400MHz (also labeled as PC4-19200) is the recommended speed. You can technically use faster RAM but it'll just run at 2400MHz anyway, so no point paying extra.
Can I mix different RAM sizes?
Yeah, you can do like 8GB + 16GB if you want. But matching sizes (like 16GB + 16GB) usually gives better performance since it enables dual-channel mode.
Do I need to remove the old RAM first?
Depends what's already in there. If both slots are full, you'll need to remove at least one stick. If you've got one slot empty, just add the new stick there.
Is it hard to install RAM in this laptop?
Not really - usually just need to remove the bottom panel, pop the old RAM out at an angle, and slide the new ones in until they click. Takes maybe 10 minutes if you're careful.