Acer Nitro VN7-793G-758J - RAM Upgrade Guide
The Acer VN7-793G-758J laptop has two memory slots available for RAM upgrades. It can support a maximum of 32GB of memory. The type of RAM compatible with this model is DDR4 SDRAM, and it uses a SODIMM form factor, which is a smaller type of memory module designed for laptops. For optimal performance, it is suggested to use RAM with a clock speed of 2133MHz, also referred to as PC4-17000.
Acer Nitro VN7-793G-758J Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Acer Nitro VN7-793G-758J |
| Total memory slots | 2 |
| Maximum RAM | 32GB |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2133MHz (PC4-17000) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Acer Nitro VN7-793G-758J RAM
How much RAM can I put in my VN7-793G-758J laptop?
You can upgrade to a maximum of 32GB total. The laptop has 2 memory slots, so you can install two 16GB modules to reach the maximum.
What type of RAM do I need for this laptop?
You need DDR4 SODIMM modules. Make sure to get laptop memory (SODIMM), not desktop RAM - they're physically different sizes and won't fit.
What speed RAM should I buy?
Get 2133MHz DDR4 modules (also labeled as PC4-17000). The system might accept faster RAM, but it'll just run at 2133MHz anyway, so no point spending extra on faster speeds.
Can I mix different RAM sizes or do they need to match?
You can mix sizes (like 8GB + 16GB), but for best performance, use matching pairs - same capacity, speed, and ideally same manufacturer. Matching modules enable dual-channel mode which improves performance.
Do I need to remove the existing RAM when upgrading?
Depends on what's already installed. If both slots are full, you'll need to replace at least one module. If you have one slot free, you can just add another module. Check what you have first before ordering.