Asus FX505 Gaming TUF - RAM Upgrade Guide
The Asus FX505 Gaming TUF laptop allows for memory upgrades with two available memory slots. It can support a maximum of 32GB of memory. The type of memory used is DDR4 SDRAM, and it comes in a SODIMM format, which is a compact design suitable for laptops. For best performance, a RAM clock speed of 2666MHz (also referred to as PC4-21300) is recommended.
Asus FX505 Gaming TUF Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Asus FX505 Gaming TUF |
| Total memory slots | 2 |
| Maximum RAM | 32GB |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2666MHz (PC4-21300) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Asus FX505 Gaming TUF RAM
How much RAM can I put in the Asus FX505?
You can install up to 32GB total - that's 16GB per slot since there are 2 slots available. Pretty decent ceiling for a gaming laptop.
What type of RAM do I need for the FX505?
You'll need DDR4 SODIMM modules - the smaller laptop-sized sticks, not the full-size desktop ones. Make sure it's DDR4, not the older DDR3 or newer DDR5.
What speed RAM should I get?
2666MHz (also labeled as PC4-21300) is the recommended speed. You could technically install faster RAM, but it'll just run at 2666MHz anyway, so save your money and stick with that speed.
Can I mix different RAM sizes?
Yeah, you can do like 8GB + 16GB if you want. But for best performance, matching sizes (like 8+8 or 16+16) is better since it enables dual-channel mode. Still works with mismatched sizes though, just not quite as fast.
Do I need to match the existing RAM exactly?
Not really - as long as it's DDR4 SODIMM at 2666MHz, you're good. Different brands usually play nice together. If you're paranoid about compatibility, just match the specs (speed, voltage, timings) rather than the exact brand.
Is it hard to install RAM in this laptop?
Pretty straightforward - remove the bottom panel, find the RAM slots, pop in the new modules at a 45-degree angle, then push down until they click. Just remember to unplug the battery first and ground yourself to avoid static damage.