Asus VivoBook X512JP - RAM Upgrade Guide
The Asus VivoBook X512JP allows for RAM upgrades with a total of two memory slots. It supports a maximum memory capacity of 32GB. The type of RAM compatible with this laptop is DDR4 SDRAM, and it uses a SODIMM form factor, which is commonly used in compact devices like laptops. For optimal performance, a RAM clock speed of 2666MHz (also referred to as PC4-21300) is recommended.
Asus VivoBook X512JP Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Asus VivoBook X512JP |
| Total memory slots | 2 |
| Maximum RAM | 32GB |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2666MHz (PC4-21300) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Asus VivoBook X512JP RAM
How much RAM can I put in my VivoBook X512JP?
You can install up to 32GB total. The laptop has 2 memory slots, so you could do 2x16GB sticks for the maximum.
What type of RAM do I need for the X512JP?
You need DDR4 SODIMM modules - that's the smaller laptop-sized RAM, not the full-size desktop sticks. Make sure it's DDR4, not the older DDR3.
What speed RAM should I get?
2666MHz (also labeled as PC4-21300) is the recommended speed. You could technically use faster RAM, but it'll just run at 2666MHz anyway, so no point spending extra.
Can I mix different RAM sizes?
Yeah, you can mix sizes like 8GB + 16GB if you want. Just know that mixing might disable dual-channel mode, which could slightly reduce performance. Best to match sizes when possible.
Do I need to remove the existing RAM?
Depends what's already in there. If both slots are full, you'll need to remove at least one stick. If there's only one stick installed, you can just add another in the empty slot.
Is it hard to upgrade the RAM myself?
Pretty straightforward - usually just remove the bottom panel, pop out the old RAM (if needed), and click the new ones in place. The sticks only go in one way. Just ground yourself first to avoid static damage.