Asus X552EA - RAM Upgrade Guide

laptop img

The Asus X552EA laptop has two memory slots for RAM, but only one of these can be upgraded by the user. The maximum amount of memory the laptop can support is 8GB, with up to 4GB possible in the slot that can be accessed for upgrades. It uses DDR3 SDRAM as the type of memory, and the form factor is SODIMM, which is a smaller type of memory module commonly used in laptops. For best performance, the recommended RAM clock speed is 1333MHz, also referred to as PC3-10600.

Asus X552EA Memory Specifications & Maximum RAM Capacity

SpecificationValue
Laptop ModelAsus X552EA
Total memory slots2 (1 not upgradeable)
Maximum RAM8GB (up to 4GB in user accessible slot)
Memory typeDDR3 SDRAM
Form factorSODIMM (Small Outline Dual Inline Memory Module)
Recommended RAM clock speed1333MHz (PC3-10600)
Voltage1.35V - 1.5V
Number of pins204-pin

FAQ about Asus X552EA RAM

Can I upgrade the RAM in my Asus X552EA laptop?

Yes, but only partially. This laptop has 2 memory slots total, but only 1 is accessible for upgrades. The other slot has soldered memory that can't be changed.

What's the maximum RAM I can have in this laptop?

The maximum total RAM is 8GB. Since one slot is fixed and the upgradeable slot supports up to 4GB, you'll need to check how much is already soldered in to determine your upgrade options.

What type of RAM do I need for the upgrade?

You need DDR3 SODIMM memory modules. Make sure to get laptop memory (SODIMM), not desktop RAM, as they're different sizes.

What speed RAM should I buy?

Get 1333MHz DDR3 RAM (also labeled as PC3-10600). While faster RAM might physically fit, the laptop will only run it at 1333MHz anyway, so there's no benefit to buying faster modules.

How do I know how much RAM I can add?

Check your current RAM configuration first. If you have 4GB total now, it's likely all in the soldered slot, so you can add another 4GB. If you already have more than 4GB, some is in the upgradeable slot that you'd need to replace.

Will any DDR3 SODIMM work in my laptop?

As long as it's DDR3 SODIMM at 1333MHz or higher (it will downclock if faster), and 4GB or less per module, it should work. Stick to standard voltage (1.5V) modules to be safe.