Lenovo IdeaPad 310-14ISK - RAM Upgrade Guide
The Lenovo 310-14ISK laptop has two memory slots for RAM, but only one of these slots can be upgraded by the user. The maximum amount of memory the laptop can support is 12GB, with up to 8GB possible in the user-accessible slot. It uses DDR4 SDRAM as its memory type, which comes in a SODIMM form factor, designed for compact devices like laptops. For best performance, the recommended RAM clock speed is 2133MHz, often labeled as PC4-17000.
Lenovo IdeaPad 310-14ISK Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Lenovo IdeaPad 310-14ISK |
| Total memory slots | 2 (1 not upgradeable) |
| Maximum RAM | 12GB (up to 8GB in user accessible slot) |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2133MHz (PC4-17000) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Lenovo IdeaPad 310-14ISK RAM
How many RAM slots does the Lenovo 310-14ISK have?
It has 2 memory slots total, but only 1 is user-accessible for upgrades. The other slot has soldered memory that can't be removed or replaced.
What's the maximum RAM I can install in this laptop?
You can go up to 12GB total. This means adding an 8GB stick to the upgradeable slot, which combines with the existing 4GB of soldered memory.
What type of RAM does the 310-14ISK use?
It uses DDR4 SODIMM modules. Make sure you get laptop memory (SODIMM), not desktop memory (DIMM) - they're different sizes.
What speed RAM should I buy for this laptop?
Get DDR4-2133MHz (also labeled as PC4-17000). This is the recommended speed that will work optimally with your system.
Can I replace the existing RAM completely?
No, you can only add to it. The laptop comes with some memory soldered directly to the motherboard that can't be removed, so you're limited to adding one stick in the available slot.
Will adding RAM actually give me dual-channel performance?
Yes, when you add a compatible stick to the empty slot, you'll get dual-channel mode which can improve performance compared to running just the single soldered stick.