Lenovo IdeaPad 330C-15IKB - RAM Upgrade Guide
The Lenovo 330C-15IKB laptop has two memory slots for RAM, but only one of these slots can be upgraded by the user. The laptop supports a maximum of 12GB of memory, with up to 8GB allowed in the slot that can be accessed for upgrades. It uses DDR4 SDRAM, which comes in a small outline dual inline memory module (SODIMM) format. For optimal performance, the recommended clock speed for the RAM is 2133MHz, which is also referred to as PC4-17000.
Lenovo IdeaPad 330C-15IKB Memory Specifications & Maximum RAM Capacity
| Specification | Value |
|---|---|
| Laptop Model | Lenovo IdeaPad 330C-15IKB |
| Total memory slots | 2 (1 not upgradeable) |
| Maximum RAM | 12GB (up to 8GB in user accessible slot) |
| Memory type | DDR4 SDRAM |
| Form factor | SODIMM (Small Outline Dual Inline Memory Module) |
| Recommended RAM clock speed | 2133MHz (PC4-17000) |
| Voltage | Low - 1.2V |
| Number of pins | 260-pin |
FAQ about Lenovo IdeaPad 330C-15IKB RAM
How many RAM slots does the 330C-15IKB have and can I access both?
It has 2 RAM slots total, but only 1 is accessible for upgrades. The other slot has soldered memory that can't be removed or replaced.
What's the maximum RAM I can have in this laptop?
Maximum is 12GB total. Since one slot has fixed memory (usually 4GB), you can add up to 8GB in the accessible slot to reach 12GB.
What type of RAM do I need to buy?
You need DDR4 SODIMM memory. Make sure it's SODIMM (the smaller laptop version) not regular DIMM which is for desktops.
What speed RAM should I get?
2133MHz (also labeled as PC4-17000) is the recommended speed. Higher speeds will work but will automatically downclock to 2133MHz, so there's no benefit to buying faster RAM.
Can I just add any 8GB stick to the empty slot?
Yes, if the accessible slot is empty, you can add up to an 8GB DDR4 SODIMM stick. If there's already RAM in that slot, you'll need to replace it with the 8GB stick.
Will dual channel memory work with one soldered slot?
Yes, the laptop will run in dual channel mode as long as you match the capacity of the soldered memory. For example, if there's 4GB soldered, adding a 4GB stick gives you 8GB in dual channel.